ORIGINAL Question:
Hi,
has anyone the right st.conf parameter for Exabyte 4200c DAT ??
Is it possible to write in uncompressed mode from Solaris 2.3?
I will summarize.
SUMMARY:
Here is the right st.conf configuration (expanded with other Exabyte devices -- Many thanks to
Mr. Dorer from DATAMAN Germany)
# Entry for the Exabyte 8mm and 4mm tape drives
tape-config-list =
"EXABYTE EXB-8205", "Exabyte 8205 8mm hh drive", "EXB-8205-data",
"EXABYTE EXB8205", "Exabyte 8205 8mm hh drive", "EXB-8205-data",
"EXABYTE EXB-8505", "Exabyte 8505 8mm hh drive", "EXB-8505-data",
"EXABYTE EXB8505", "Exabyte 8505 8mm hh drive", "EXB-8505-data",
"EXABYTE EXB-8500C","Exabyte 8500C 8mm fh drive","EXB8500C-data",
"EXABYTE EXB8500C", "Exabyte 8500C 8mm fh drive","EXB8500C-data",
"EXABYTE EXB-4200", "Exabyte 4200 4mm drive", "EXB4200-data",
"EXABYTE EXB-4402", "Exabyte 4402 4mm drive", "EXB4402-data",
"EXABYTE EXB-4404", "Exabyte 4402 4mm drive", "EXB4404-data";
EXB-8205-data = 1,0x28,1024,0x0039,4,0x14,0x90,0x90,0x90,2;
EXB-8505-data = 1,0x29,1024,0x0039,4,0x14,0x90,0x15,0x8c,4;
EXB-8500C-data = 1,0x29,1024,0x0039,4,0x14,0x90,0x15,0x8c,4;
EXB4200-data = 1,0x34,0,0x0039,4,0x63,0x43,0x43,0x43,2;
EXB4402-data = 1,0x34,0,0x0039,4,0x63,0x43,0x43,0x43,2;
EXB4404-data = 1,0x34,0,0x0039,4,0x63,0x43,0x43,0x43,2;
Many thanks to all. All responses gave me important informations
Donald McLachlan Communications Research Centre / DRX
allen@brc.ubc.ca
Stefan Dorer DATAMAN Germany
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:09:15 CDT