Sun-Managers ,
My original message:
> > 
> > Sun-Managers,
> > 
> > We currently have 3 modems hooked to a 670 server via a sun
> > serial/parallel controller.
> > 
> > My problem is that the modems do not allow clean file transfers (no CRC
> > errors) via Z-modem. The modems were once connected through a terminal
> > server which has since been put to other use. While it was on the
> > terminal server I was able to get them working fine. Now they don't.
> > 
> > I have even connected a modem directly to the server and I get the same
> > results (can't transfer any type of file via Z-modem) so I believe it
> > is my modem settings.
> > 
> > 
> > Below are the settings of the modem I have been using for tests. It is a
> > Telebit World Blazer.
> > 
> > WorldBlazer - SA - Version LA7.02 - Active Configuration
> >  B1  E1  L1  M0  Q2  T   V1  X4  Y0 
> > &C1 &D2 &G0 &J0 &L0 &Q0 &R3 &S0 &T4 &X0 
> > S000:1   S001=0   S002=43  S003=13  S004=10  S005=8   S006=2   S007=60 
> > S008=2   S009=6   S010=14  S011=70  S012=50  S018=0   S025=5   S026=1  
> > S038=0   S041:3   S045=0   S046=0   S047=4   S048=0   S050=0   S051:6  
> > S056=17  S057=19  S058:2   S059=0   S060=0   S061=1   S062=15  S063=0  
> > S064=0   S068=255 S069=0   S090=0   S092:1   S093=8   S094=1   S100=0  
> > S104=0   S105=1   S111=255 S112=1   S113=126 S114=0   S115=0   S151=4  
> > S155=0   S180=2   S181=1   S183=25  S190=1   S191=7   S253=10  S254=255
> > S255=255 
> > OK
> > 
> > It is currently back to the settings that used to work with the
> > terminal server. It is currently set for hardware control, I have tried
> > Xon/Xoff with no change in results.
> > 
> > Are there any modem experts out there that could help?
> > 
> > Ed Baxter
> > Praegitzer Industries
> > 
THANKS! to Steven Grevemeyer who hit the nail squarely on the head when
        he wrote:
----- Begin Included Message -----
The hardware flow control is broken on the 670s.  
try this:
stty crtscts tostop
and then do your transfer. (make sure you have rts/cts turned on
on the modem and not xon/xoff).
-seg
----- End Included Message -----
Thanks also to:
Larry Chin
Ken Burns
Chris Griffin
for their responses.
Ed Baxter 
Praegitzer Industries
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:09:09 CDT