Hy Managers,
I was trying to use an LaserJet 4+ with the HP software
on Solaris 2.3.
Didn't work...so I asked the help from the net and I receive
the following responses :
First, the WINNER is Mike Jones (jonesmd@aule-tek.com), here's
what he wrote :
> Did you install from the cdrom? If so, there's a bug in the
>installation procedure. There's a sed problem that causes the model
>file to be zero length. Look in the installation log to see if there's
>a sed error reported and note the file name. Check the length of that
>file. If it's 0, that's your problem.
>To fix it: reinstall, but tell it you *do* have Motif installed. Copy
>the model file to /tmp, then reinstall *again* and tell it you *don't*
>have Motif. It only attempts the failing sed command if you don't have
>Motif. Copy the model file from /tmp to the appropriate place and go in
>with vi and change the line "jobm=yes" to "jobm=no", which is what the
>failing sed command is *supposed* to do.
> Mike Jones | jonesmd@aule-tek.com
>There is a level of abstract thinking that comes only from writing
>code intended to be portable across architectures.
> - P. J. Plauger
>
I've tested it, and in fact it was the file
/usr/lib/hpnp/sh/hpnp.model.sol which was 0 byte long. I've followed
Mike's procedure, and now it has 22 Kbytes long...better !!!
Thanks again Mr Jones...
Here is some others interesting things :
>From Bob Haxo (rshaxo@ucdavis.edu) (2 responses, many thanks)
> Subject: Re: JetDirect Card & Solaris 2.3
> Hp support provided te following (correct) advice:
>ftp working software from :
>Name: ftp-boi.external.hp.com
>Address: 192.6.71.2
>Directory was obvious (something like /pub/printers/laserjet/????)
>Files which I retreived included:
>README hpnpC02.readme new.software.txt
>README.1ST.SOL22_23 hpnpC02.sol.tar
>Installation worked. Solaris 2.3 spooling directories set up correctly
>and can now print.
>Please SUMMARY to sun-managers. Thanks.
>--bob (916.739.8688, FAX 916.227.2672) << SNEP in Sacramento
==========================================================================
Another interesting possibility, whick works well :
>From Martin Hofbauer (mh@bacsun.co.at)
>I found out a second, complete differant way to use this printer:
>( And I think better way):
>This Version of SW from HP ( V B.00.00 ) includes also a daemon
> called "hpnptyd" which makes a virtual connection from a
> "pseudo device" e.g. /dev/ttyp0 directly to the printers
> TCP/IP port. ( see man-pages, which are included )
>If your run this daemon during startup or by hand, it is then
> possible to add a printer with the "printer manager" from
> "admintool" to this device as it is a local serial printer.
> It worked without any problmes on my site
>Thanks to nick.brealey@aea.orgn.uk (Nicholas J Brealey)
>and to all others , who helped me
>From rao@hobbes.crc.com :
>Subject: Re: JetDirect Card & Solaris 2.3
>
>I had this same problem and I am trying to remember the solution.
>
>I think I had to:
>1) chmod 666 /dev/null
>2) give "other" rx permissions on /usr/lib/lp/model and the scripts in
that
> directory.
>Let me know if this is it and I will try to remember anything else.
Thanks to the others too :
raoul@MIT.EDU (who change the JetDirect card
and now has got a Netjet from Emulex)
gleen@uniq.com.au
tim@metblanc.access.com (but why a blank message ?)
worksham@aer.com
yves@BComeau.Hydro.Ouc.Ot
havishm@pcsdnfs1.eq.gs.com
mfrank@ftc.gov
mh@bacsum.co.at
b.king@surney.ac.uh
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:09:06 CDT