> Hello everyone,
> Does anyone know how to enable the on-board SX video port on a Sparc 20 TX
> workstation? The workstation came with a Turbo GX S-Bus video card and that
> seems to work fine. However, if I remove the S-Bus video card and connect
> the monitor to the video port on the mother board, I do not get any video.
> Is this 'on-board' video port suppose to work? According to a Sun Engineer,
> I should be able to use either video ports. I've tried this on two new systems
> and they both fail to work. The systems boot up fine, but there is no console
> video and dmesg does not report an video devices.
> Thanks in advance,
Essentially, Sparc 20's which are shipped with other graphics options do not
come with VRAM for the on-board SX video port. Such VRAM can be ordered in
4MB and 8MB SIMMS configurations.
Thanks to all who replied:
firstname.lastname@example.org (Doug Jones)
email@example.com (Barnes William)
drd@Access.COM (David Deardoff)
firstname.lastname@example.org (Lewis E. Wolfgang)
email@example.com (Paul Dodd)
Arnold M. Yee BARRA
Systems Administrator 1995 University Ave. #400
firstname.lastname@example.org Berkeley, CA 94704
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:09:03 CDT