Hello,
Sorry for the delay in summarizing.
The original question:
>Does anyone know of a seamless way to integrate an Apple LaserWriter on
>EtherTalk with a SS10 in such a way that the LW has a printcap entry and
>files are spooled on the Sun, and ASCII can be printed without the painful
>procedure of pumping it through either mp or enscript?
The basic idea is to use papif, not lwpr as I was previously trying, and to
set up a printcap entry similar to the following:
#
# Apple LasterWriter Pro 630 Ethernet printer
#
apple|Apple|Appleps|appleps|LaserWriter Pro 630:\
:lp=/dev/apple:\
:sf:\
:if=/u/local/src/cap60/bin/appleif:\
:of=/u/local/src/cap60/bin/papof:\
:af=/usr/spool/lpd/apple/acct:\
:lf=/usr/spool/lpd/apple/log:\
:sd=/usr/spool/lpd/apple:\
:mx#0:
Where the if points to a script which checks if the file is ASCII, and if so,
converts it to PostScript, otherwise just passes it to papif.
I managed to set up the printcap entry as people suggested, but none of the
if scripts suggested worked for me.
If anyone is interested in seeing full replies (there are 23 of them) I can
e-mail them at your request.
Thanks to
per@erix.ericsson.se (Per Hedeland)
iain@sun-shop.adelaide.edu.au (Iain Lockyer)
juerg <juerg@textil.mabp.ethz.ch>
Martin Achilli <ACHILLM%IMIHSRA.bitnet@ICINECA.CINECA.IT>
barnum@pluto.crd.ge.com (Maria A. Barnum)
Joseph McPherson <jmcphers@bio.ri.ccf.org>
"Frederic Piard" <frederic_piard@kangourou.erli.gsi.fr>
Ted Nolan SRI Ft Gordon <ted@ags.ga.erg.sri.com>
raoul@MIT.EDU
john@oncology.uthscsa.edu (John Justin Hough)
pfalzgmh@eckerd.edu (Marisa H. Pfalzgraf)
Daryl Doami <74140.3553@CompuServe.COM>
howie@warlok.ds.boeing.com
JC Touvet <Jean-Christophe.Touvet@inria.fr>
John Valdes <valdes@geosun.uchicago.edu>
Wei-Yeh Lee <weiyeh@columbia.edu>
Yury Dubinsky <dubi@cs.columbia.edu>
gdonl@gv.ssi1.com (Don Lewis)
REEDWV@RCWUSR.BP.COM
crane%cadlab.ECE.Drexel.EDU@CoE.Drexel.EDU (Richard Crane)
tkld@cogsci.edinburgh.ac.uk
Canan Eren <eren@css3s0.engr.ccny.cuny.edu>
-----
Michael A. Meystel
Systems & Network Administrator
Computer-Aided Design Laboratory
Department of Mechanical Engineering and Mechanics
Drexel University, College of Engineering, Philadelphia, PA USA
+ 1 215 895 5807 / fax + 1 215 895 4929 / meystel@cad.mem.drexel.edu
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:09:03 CDT