In article <2mfesf$co5@serra.unipi.it>, tito@di.unipi.it (Tito Flagella) writes:
|> I still get the message:
|>
|> /dev/rst1: no tape loaded or drive offline
|>
|> with an HP 35450A connected to 4.1.2 with the known patch to st_conf.c.
|>
|> Since this problem seems to be due to the switch set,
|> can anybody explain what switch mask is using with this driver.
|> Stewart suggest to use:
|>
|> dip switches 1-5 on, 6-8 off.
|>
|> but unfortunatly 35450A has only four switches, and the last three seems to be used for the SCSI id setting.
|>
|> Anybody can help?
|>
|> Tito Flagella.
|>
|> -------------------------------------------------------------------
|> Tito Flagella Information Technology Consultant
|> Universita' di Pisa ---------------------------------
|> Dipartimento Informatica email: tito@di.unipi.it
|> Corso Italia 40 fax : +39 (50) 887226
|> I-56125 Pisa tel : +39 (50) 887263
|> -------------------------------------------------------------------
|>
We are suffering from the same problem. If someone has the solution please
post.
Buyurman Baykal
b.baykal@ic.ac.uk
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:08:57 CDT