I asked:
>|> I would like to allow dial-in slip to a 4/330 running 4.1.3. I have
>|> installed a slip patch from netcom (contains tty_slip.c) and rebuilt the
>|> kernel, but netcom says they have only used this for dial-out, not dial-in.
>|> What do I need to do?
I received one reply, suggesting MorningStar PPP (which also does slip).
Since I really only needed slip, and didn't have extravagant requirements, I
ended up ftp'ing cslip 2.7 from ee.lbl.gov. The instructions for patching
the kernel and setting up the login environment were very clear and I had
the whole thing up and running in four hours, even though I am not really a
sys admin. One thing I didn't get to work was compressed slip from PC
(Trumpet WinSock tcp/ip) to SUN; there may be some protocol difference, or
some configuration switch I missed. The regular slip from PC to SUN worked
fine. Hats off to the implementors!
Rob
------------------------------------------------------------------
| Rob Weltman robw@microguild.com |
| Microguild, Inc. (415)-428-3693 |
| 888 Villa Street, suite 500 fax (415)-428-3696 |
| Mountain View, CA 94041 |
------------------------------------------------------------------
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:08:55 CDT