Thanks to the many who responded to my post for help. It turned out
that all I had to do was press the reset button near the power cable
socket. Turning the printer on & off has no effect.
I also found out that some early models of sparcprinters won't work
even after a reset and must be replaced, (hopefully free of charge.)
Again thanks to everyone for the quick response.
My original post follows:
> Help our printer isn't working.
> We got a sparcprinter from antoher group a few months ago. The toner
> cartridge ran out. So we replaced the old one.
> We weren't given any manuals with the printer but the cartridge had
> installation instructions printed on it and we followed them.
> Anyways the printer still has the toner low light on and the code "J5"
> in the led on the front top left of the printer.
> Can anyone help us out? The printer refuses to work.
The people who helped were:
Anthony.Worrall@Reading.ac.uk, firstname.lastname@example.org, bmeadows@PICA.ARMY.MIL,
email@example.com, Daniel@europarc.xerox.com, firstname.lastname@example.org,
email@example.com, firstname.lastname@example.org, email@example.com,
firstname.lastname@example.org, email@example.com, firstname.lastname@example.org,
owens@hpn.TRW.COM, email@example.com, firstname.lastname@example.org,
email@example.com, firstname.lastname@example.org, email@example.com, firstname.lastname@example.org,
email@example.com, James.Ashton@anu.edu.au, firstname.lastname@example.org
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:08:53 CDT