The problem was: we needed a repeater/retiming module on the hub. (Don't I
feel dumb :-( ).
Original message:
-------------
Our current network consists of a bunch of SPARC1+'s and SPARC2, connected via
thinnet coax wire. (Aui port -> aui cable -> transceiver -> coax ). When
we moved to new quarters, we got a 10Base-T hub, 10Base-t transceivers,etc.
When I connected everything up, nothing happens. (The power light on the
10Base-T trans. is green but the link, Inv, Tx, Rx and Col lights are all
dark, all the right lights are green on the hub and sqe is off).
le0: No carrier - transceiver cable problem?
Any suggestions would be most welcome.
----------------
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Catherine Fulmer : ,-^,
cfulmer@pnc-pimc.com : _ ___/ /\|
: ,;`( )__ ) ~
PNC BANK (Phila, Pa) : // // `--;
*** Voice: 215-521-7828 *** : ' \ \
*** Fax: 215-521-7980 *** : ^ ^
My words are mine, and don't reflect the views of my employer.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:08:25 CDT