Ned Danieley (firstname.lastname@example.org) wrote:
: I need to be able to boot my 3/260 from a CDC disk attached via
: a Ciprico (Rimfire 3220) controller. I've done this with a 3/160,
: but it required changing the boot PROM. one possibility would be
: to swap boot PROMS (I no longer need to boot the 3/160 from the
: ciprico), but I'd hate to zap either of the PROMS. does anyone know
: if I can swap a 3/260 boot PROM for one out of a 3/160? (I can't
: use the 3/160 in the application, by the way.)
: another alternative would be a way to boot the 3/260 and then have
: it get its root, swap and usr from the CDC.
turns out that the boot PROMS are NOT compatible. swapping them
didn't hurt anything, but gave me two systems that wouldn't boot.
however, it is possible to boot off the net and then switch to the
Ciprico. the kernel config file has to have the line
config vmunix root on rf0a swap on type spec rf0b
where rf0 is the disk attached to the ciprico controller, AND
swapgeneric.c has to be slightly modified to find that controller.
for actually figuring all this out and sending me the mods.
-- Ned Danieley (email@example.com) Basic Arrhythmia Laboratory Box 3140, Duke University Medical Center Durham, NC 27710 (919) 660-5111 or 660-5100
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:07:46 CDT