I wrote describing the problems I was having installing a 2nd 4 meg expansion "Carerra" board in my Sun 3/160 and the graphics problems that seemed to come along with it.
I got many responses, most suggesting that I rearrange my boards and take out the jumpers for BG3 and IACK for my SCSI board. I did that, and it was also necessary to adjust the DIP switches on the 9-12 meg board.
John Valdes <valdes@geosun.uchicago.edu> writes:
>If you have no docs, and it's a Sun 4MB memory board (part # 501-1132), set
>switch 5 in DIP switch U3118 and switch 6 on U3119 to ON (the others should be
>OFF).
Indeed, the machine then recognized all 12 megs. But the monitor was still fuzzy when there was a lot of activity on the machine.
andrews@Erin.GOV.AU (Andrew Scarman) writes:
>To check if it's something like the power supply which is quite possible I
>would remove the SCSI board and try just the CPU with the two memory boards.
>I have seen this problem before when the +5 is out.
Indeed, due to some loose connections between my power supply (which is from a
Sun 2, and plenty big) only 4.5 volts were reaching the backplane. After
some adjustments, it works fine.
Thanks all, I have to demo this machine for someone tomorrow:-)
Thanks to:
drs@hicomb.hi.com (Dave Smith)
nassio@cfassp8.harvard.edu (George Nassiopoulos P-353 495-7181)
HILL@cgi.com (Bear) (who, BTW, faxed me the correct board order from
the FE guide)
andrews@Erin.GOV.AU (Andrew Scarman)
Anthony.Worrall@reading.ac.uk (Anthony Worrall)
winters@ct.med.ge.com (Steve Winters)
mharris@jpmorgan.com (Michael Harris)
evan@flatiron.fsg.com (Evan L. Marcus [Fusion Services Group])
Mike.Jenkins@NCTS.NAVY.MIL (Mike Jenkins)
Mike Raffety <miker@il.us.swissbank.com>
John Valdes <valdes@geosun.uchicago.edu>
Perry_Hutchison.Portland@xerox.com
Brad.Albom@Eng.Sun.COM (Brad Albom)
sls@cs.duke.edu (Shelley L. Shostak)
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:07:37 CDT