No replies to this prob, apart from a few suggestions of alternative
sbus serial cards. ( Thanks all the same...)
Searching through the spiff install script for clues, I found a comment
that indicated "8" spiff cards can be configured per system. The install
script is set up to only configure a max of 3 cards.
The solution was simple. When running the install script, do not run
the "configuration script." Rather than doing this, reconfigure the Kernal
manualy as per the instructions in appendix A in the "serial parallel
controller user's guide." This will configure the system for 8 spiff
cards. The /etc/ttytab and the /usr/etc/stc_defaults files must be
configured manually.
I now have the SS10-30 running 5 spiff cards with the aid of a sbus
expansion module. No problems.
Gary Marazita
ComputerVision Services
Melbourne Australia
gam.gary@melpn1.prime.com
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:07:31 CDT