I asked two weeks ago about printing via PC-NFS to a local printer
under Windows3.1. I recevied replys from:
email@example.com (Liesl Prather)
firstname.lastname@example.org (Margaret E. Myers)
email@example.com (Mike Andrews)
firstname.lastname@example.org (Hermann Kuhn)
Peter Kaldis <peter@Civil.Concordia.CA>
Several pointed out that they had this problem, but the 4.0a Release Notes
discussed this (sorry about that people - I shoulda caught it) as shown below:
When configuring Printers to be used with PC-NFS software, it is
recommended that you use the Print Manager. You can do so by selecting
"Use Print Manager" in Control Panel. Print Manager correctly handles
output redirection to a local or remote printer. If you have problems
printing to a local printer (i.e., one attached to your machine), go
to Print Manager and verify that "Print Net Jobs Direct" is disabled.
In Windows 3.1, select "Options" and then select "Network Settings."
In Windows 3.0, select "Options" and then select "Network."
Also, don't forget to start RTM up before Windows (after your RTFM!).
BTW, we have also found out recently that it seems to be best to
install WorkGroups for Windows *before* installing PC-NFS.
Alek Komarnitsky 303-449-0649
Software Tools Manager, Spatial Technology, Inc. 2425 55th Street, Bldg A
email@example.com Boulder, CO 80301-5704
P.S. Now if we could only get our hands on PC-NFS for NT! ;-)
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:07:31 CDT