email@example.com (Kees Huizing) writes:
>Is there a program with which you can read and write Macintosh disks on a
>Sun (Sparc station)? I know that the 800K format will be difficult, because
>of the varying motor speed. The 1440K format ought to be possible, although
>it seems to be a bit more complicated than, e.g. MS-DOS, due to the more
>complicated file structure of the Macintosh. Has anyone tried this?
First to non-answers.
1. You can use mtools to read and write MS-DOS disks on the Sun and then use
on the Macintosh with AppleFileExchange or another utility, if you have
a Mac with Superdrive.
2. You can read and write (DOS-formatted) disks on the Sun in the tar or bar
format and use them on the Macintosh with suntar. This is indeed a solution,
suntar even recognises MacBinary and converts it automatically, but is quite
slow (on both sides, due to the sequential structure of tar and bar
I was looking for a utility like mtools that reads and writes true Macintosh
disks on a Sun. This seems not to exist as such. What does exist is Liken, a
complete Macintosh emulator for the Sun that also supports Macintosh disks.
See a parallel posting in these newsgroups for details about Liken.o
Thank you for the answers.
-- Kees Huizing - Eindhoven Univ of Techn - Dept Math & Comp Sc - The Netherlands e-mail: firstname.lastname@example.org telephone: +31-40-474120 fax: +31-40-463992
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:07:29 CDT