Thanks a lot to all who replied to help out!!
We now have all of the 3/50's up and running.
The trick is that there are 8 DIP switches on the motherboard. If you
slide them all towards the AUI port, then AUI is selected. If you slide
them all towards the coax port, then you select the coax.
It turned out that the hardest part was finding an allan wrench small
enough to remove the screws on the back, so that we could slide the board out.
Anyway, thanks again to all who responded!
I really appreciate the help!
-- Jon Herlocker email: email@example.com Lewis & Clark College Portland, OR 97219
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:06:54 CDT