Summary: EXA8500C and density flags (corrected)

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Looks like I patched in the wrong line,.... actual correct entry is:

> Original question:
> > Subject: EXA8500C and density flags
> >
> > I am making up a new st_conf.c for our 8500C drive and I have modified it to read:
> > /* Exabyte 8mm 5GB cartridge with Compression */
> > {
> > "Exabyte EXB-8500C 8mm Helical Scan", 16, "EXABYTE EXB8500C",
> > ST_TYPE_EXB8500, 1024,
> > (ST_VARIABLE | ST_BSF | ST_BSR | ST_LONG_ERASE),
> > 5000, 5000,
> > { 0x14, 0x00, 0x8C, 0x8C },
> > { 0, 0, 0, 0 }
> > },
> >
> > ok, so far so good, but the line
> > { 0x14, 0x00, 0x8C, 0x8C },
> >
> > specifies the density modes. I'd like to be able to use them
> > as 8200, 8500, 8200 w/compression, 8500 w/compression
> > How do I change this line to specify that?
>
> Answer:
/* Exabyte 8mm 5GB cartridge with Compression */
{
        "Exabyte EXB-8500C 8mm Helical Scan", 16, "EXABYTE EXB8500C",
        ST_TYPE_EXB8500, 1024,
        (ST_VARIABLE | ST_BSF | ST_BSR | ST_LONG_ERASE),
        5000, 5000,
        { 0x14, 0x15, 0x90, 0x8c },
        { 0, 0, 0, 0 }

> Thanks to:
> dan@bellcore.com (Daniel Strick)

Sorry about that.

-- 
========================================================================
Sydney S. Weinstein, CDP, CCP          Elm Coordinator - Current 2.4PL11
Datacomp Systems, Inc.                 Projected 3.0 Release: ??? ?,1994
syd@DSI.COM or dsinc!syd      Voice: (215) 947-9900, FAX: (215) 938-0235

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:06:53 CDT