SUMMARY: eeprom setting to boot sd1a

From: Tim Evans (tkevans@eplrx7.es.duPont.com)
Date: Thu Nov 12 1992 - 15:51:37 CST


Yesterday, I asked:

>What is the eeprom setting to boot ("boot-from") a Sparc 1+
>from sd1a? Thanks.
>

Thanks for quick answers to:

Brent Alan Wiese <brent@crick.ssctr.bcm.tmc.edu>
fabrice@pure.com (Fabrice Guerini)
Eckhard.Rueggeberg@ts.go.dlr.de
leon@orbot.co.il (Leon Koll)
matis!yossi (Yossi Cohen)
Torsten Metzner <tom@uni-paderborn.de>
wsj%dpm@fem.unicamp.br
Simon Coppins <coppins@arch.adelaide.edu.au>
ups!upstage!glenn@fourx.Aus.Sun.COM (Glenn Satchell)
ups!kevin@fourx.Aus.Sun.COM (Kevin Sheehan {Consulting Poster Child})
geertj@ica.philips.nl
polaris1!support!lv@uunet.UU.NET (Luis Vallejo)

There are a couple of ways of going at this:

o From multi- or single-user mode (to make the change permanent,
        which is what I wanted):

        root# eeprom boot-from=sd\(0,1,\)

        (Note the escaped paren's)

o From the boot prompt:

>b sd(0,1,0)

        (This does not make the change permanant, however)

unixname2bootname(8) will convert a device name to a boot
device name, as in:

unix% /usr/kvm/unixname2bootname sd1a
sd(0,1,0)

-- 
Tim Evans                     |    E.I. du Pont de Nemours & Co.
tkevans@eplrx7.es.dupont.com  |    Experimental Station
(302) 695-9353/7395           |    P.O. Box 80357
EVANSTK AT A1 AT ESVAX        |    Wilmington, Delaware 19880-0357



This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:06:53 CDT