In article firstname.lastname@example.org, I wrote:
>I have an NEC CDR-72 CD-ROM reader connected to the SCSI bus on my
>Sparcstation SLC (running SunOS 4.1.2). It is the only device on the
>bus and is properly terminated.
>When I do this, the disc spins and I get the following messages:
> booting from sd(0,6,2)
> Bad magic number in disk label!
> The file just loaded does not appear to be executable.
>I have called Sun technical support, and what their engineer told me
>basically is, "It's not a Sun drive: if it works, great; if it doesn't,
>you're on your own."
>Has anybody ever successfully used one of these NEC drives on a Sun
>workstation? Does anybody have any ideas what I need to do to get this
>to work? I would appreciate any help anyone can give. Responses via
>e-mail and I'll post the outcome if anybody wants me to.
First, thanks to all who responded.
The gist of the answers is that a CD-ROM drive needs special firmware
to operate with a Unix system. Sun drives, plus some from Sony, have
this special firmware. This special firmware enables the drive to use
a block size of 512 bytes.
One respondant stated that, although I cannot boot the machine from the
NEC drive, I should still be able to read CD-ROMs in it after booting
from another device. In practice I have found this to not be the
case. I have been unable to mount a CD-ROM filesystem on the NEC
So, it appears the NEC drive cannot be used on a Sun workstation.
-- Roger Chaplin / Instruments Division Engineering / "Worry does not empty email@example.com / CI$: 76307,3506 / tomorrow of sorrow - #include <disclaimer.h> / it empties today of strength." #include "disclaimer.h" /* cover all bases */ / - Corrie ten Boom
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:06:49 CDT