SUMMARY: Terminal settings for Wyse SS2 console

From: M.Lim@anu.edu.au
Date: Tue Aug 04 1992 - 11:26:17 CDT


My original request :

>
>I've just taken delivery of a SparcServer 2. It's delivered with a Wyse 50
>terminal for use as it's console. I've hooked it upto ttya, set the eeprom
>input and output devices to ttya, started a getty on it, but cannot
>seem to get the keyboard to accept any input. Output from console messages,
>etc. work just fine, just no input.
>
>Could anyone please tell me what the correct terminal and eeprom setup to
>make it work are? Here are my current settings :
                **** STUFF DELETED ****

Thanks to the following people who all sent useful information. By trying a
combination of all the suggestions I recieved, I arrived at the following
settings.

From: gaby@rsbs13.anu.edu.au (Gaby Hoffmann)
From: Calum Mackay <calum@mrc-bsu.cam.ac.uk>
From: Wilson N G <noel@essex.ac.uk>
From: matt@wbst845e.xerox.com (Matt Goheen)
From: oneel@arupa.gsfc.nasa.gov (Bruce Oneel )
From: amick@erim.org (Richard Amick)
From: kalli!kevin@fourx.aus.sun.com (Kevin Sheehan {Consulting Poster Child})
From: danny@ews7.dseg.ti.com
From: phil@cgrg.ohio-state.edu (Phil Ritzenthaler)
From: ept@eptsun1.ctd.ornl.gov (E P Tinnel)
From: Perry_Hutchison.Portland@xerox.com
From: katkam@fuwutai.att.com
From: trdlnk!mike@uunet.uu.net (Michael Sullivan)
From: kalli!glenn@fourx.aus.sun.com (Glenn Satchell)
From: geoff@fulcrum.oz.au (Geoff Halprin)

EEPROM settings :

        name=options
        selftest-#megs=1
        oem-logo=
        oem-logo?=false
        oem-banner=
        oem-banner?=false
        output-device=ttya
        input-device=ttya
        sbus-probe-list=0123
        keyboard-click?=false
        keymap=
        ttyb-rts-dtr-off=false
        ttyb-ignore-cd=true
        ttya-rts-dtr-off=true
        ttya-ignore-cd=true
        ttyb-mode=9600,8,n,1,-
        ttya-mode=9600,8,n,1,-
        fcode-debug?=false
        diag-file=
        diag-device=net
        boot-file=
        boot-device=disk
        auto-boot?=true
        watchdog-reboot?=false
        local-mac-address?=false
        use-nvramrc?=false
        nvramrc=
        screen-#columns=80
        screen-#rows=24
        sunmon-compat?=true
        security-mode=none
        security-password=
        security-#badlogins=0
        scsi-initiator-id=7
        hardware-revision=
        last-hardware-update=
        testarea=85
        mfg-switch?=false
        diag-switch?=false

Relevant Terminal settings :

        Personality VT100
        Enhance Mode ON
        Baud 9600
        Data/Parity 8/none
        Stop Bit 1
        RCV Handshake NONE
        XMIT Handshake NONE
        Comm FDX
        

Mathew Lim, Unix Systems Programmer, ANU Supercomputer Facility,
Australian National University, GPO Box 4, Canberra City, ACT, Australia 2601.
Telephone : +61 6 249 2750 |
Fax : +61 6 247 3425 | E-Mail : M.Lim@anu.edu.au



This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:06:46 CDT