>I have here an interesting problem,
>For reasons I'd rather not go into, we have a 4/630MP board w/o IPI
>We also have a Maxtor 1Gig SCSI drive. So I got the idea, we just put the SCSI
>drive on the MP. Right? Wrong.
>The system will not boot, giving me a TRAP 0xbe
>I can boot from the net.
>So, will I have to confiure this thing to boot from the net, and get the
>rest locally or is there something I missed?
For starters, 50 lashes with a wet noodle for not being clearer in the
statement of question. What I failed to make clear was that, following the
install of the miniroot on the drive I could not boot the miniroot.
So the pointers to making sure I ran installboot, while appreciated, were
After spending time on the phone with Sun it was determined that the drive
itself was the problem, I could boot a 4/330 with this drive but not the
630. After contacting the vendor, I found that the drive was ~8 revs out of
date (GB-15 vs JB-22!) they shipped me a replacement and all is well.
The thing that tipped us off was when a probe-scsi command was issued
the drive responded for all 8 LUN positions (virtual disk? :) )
So, rumors to the contrary, you can boot a 630 and 670 from SCSI,
but make sure that if you have a MAXTOR P-12S, it has a rev near
Paulo L de Geus INTERNET:firstname.lastname@example.org
John Kilheffer email@example.com
Radiation Research Lab |Internet: firstname.lastname@example.org
Loma Linda Universtiy Medical Center | UUCP: ...ucrmath!proton!baumann
Loma Linda, California. (714)824-4077|
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:06:41 CDT