My original posting was:
> Does anyone know whether and ALM-1 board will work on a MP670? Secondly
> does anyone currently have an ALM-1 on a MP670, and how well does it work.
I recieved three responses, one saying it works fine, and two doubting
that it would work:
The positive response was:
> From: Matt Crawford <matt@edu.uchicago.oddjob>
>
> I have 2 ALM-1s on a 4/690MP. My system was hanging 1 to 3 times a
> day, but when I turned off a home-brew streams protocol on ttyb (a
> driver that was working perfectly on uniprocessor sun-4's), the
> problem disappeared. Now the only VME devices are the IPI disk
> controller and the two ALM-1s and the system is perfectly fine.
> (Since our usage tends to be compute-bound, we don't even have that
> high-system-fraction others have complained of.)
I asked a follow up question and recieved further info:
> I copied the driver from a 4.1.1 system, and the config file has
>
> device mti0 at vme16d16 ? csr 0x620 flags 0xffff priority 4
> vector mtiintr 0x88
> device mti1 at vme16d16 ? csr 0x640 flags 0xffff priority 4
> vector mtiintr 0x89
>
> The jumpers are just as they were when the board was in a 3/280, and
> the boards are now in slots 6 & 7 (out of 16 slots).
>
> ________________________________________________________
> Matt Crawford Astronomy & Astrophysics U of Chicago
The two doubtfull responses were:
> From: derek@ca.nexus (Derek Mallard)
>
> I would bet that an ALM-1 will NOT work on the MP670. The reason I say
> this is because we are stuck at O/S 3.5 on a 3/280 because sun
> STOPPED supporting the ALM-1 after 3.5.
>
> Derek Mallard
> derek@nexus.ca
This is not true ... the ALM-1 works under 4.1.1 and there is a device driver
provided.
and
> From: kevin%kalli@COM.Sun.Aus.fourx (Kevin Sheehan {Consulting Poster Child})
>
> Well, the board may work, but I am pretty certain that the driver was
> not ported over. I remember this being one of the non-supported boards.
>
Thanks to:
Matt Crawford <matt@edu.uchicago.oddjob>
Derek Mallard <derek@ca.nexus>
Kevin Sheehan <kevin%kalli@COM.Sun.Aus.fourx>
Donald
-----------------------------------------------------------------------------
| Donald Ballance, JANET: donald@uk.ac.gla.eng.ctrl |
| Control Group, BITNET: donald@ctrl.eng.gla.ac.uk |
| Dept. Mechanical Engineering, donald%ctrl.eng.gla.ac.uk@ukacrl.bitnet |
| The University, INTERNET: donald%ctrl.eng.gla.ac.uk@cunyvm.cuny.edu |
| Glasgow. G12 8QQ. donald%ctrl.eng.gla.ac.uk@nsfnet-relay.ac.uk|
| Scotland. Tel: +44 41 339-8855 Ext. 5187 Fax: +44 41 330-4343 |
| U.K. Control Information Database Manager |
-----------------------------------------------------------------------------
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:06:40 CDT