Earlier I wrote:
>Sys: Sparc1
>OS 4.1.1
>Prob:
> After it is all setup and I try to print, the lpc stat for the printer
>says: sparc: ready and printing. Unfortunately, it never does.. after
>sparc:
> queuing enabled
> printing is enabled
> 2 entries in spool area
> unable to print: sys err: invalid argument
And the problem was that I didn't have the LWP and ASYNCIO configured in
the kernel... I didn't RT(whole)FM, the section in question is in the
appendix B, page 4 in the NeWSprint INstallation & Admin manual...
see step #3 on that page...
Thanks go out to :
uunet!hal.com!phanes (Pamela D. Hanes)
uunet!millidc!indigo!djm (Drew Montag)
Steve Szymanski <uunet!bae.bellcore.com!sjs>
uunet!atmos.washington.edu!marc
Rick Niziak
System Admin
Visual Technology
rickn@visual.uu.net
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:06:36 CDT