My original posting:
>I have a 4/260-4.1.1 with two CDC SMD drives, one Sabre-850 and one
>Sabre-736 as xy0 and xy1, respectively. [...] The machine works fine
>with the 736 as the only disk, xy1, and reconnecting the 850 as a
>non-bootable xy0 also appears to be ok during boot [... but] when I
>login as root and run "format", the choice of disks is limited to xy1 only.
Well, I suppose it does help to think the process through before posting.
Since I had reloaded/upgraded the OS with xy0 still off the daisychain, of
course there were no xy0 entries in /dev. Dumb. "MAKEDEV xy0" and all
is well. Thanks to:
caxwgk@pki-nbg.philips.de (Wolfgang Kuehnel )
edsr!jcn@uunet.UU.NET (Jim Niemann)
Mike Raffety <miker@sbcoc.com>
poffen@sj.ate.slb.com (Russ Poffenberger)
wallen@cogsci.UCSD.EDU (Mark R. Wallen)
And all you others out there whose mail has yet to arrive. :-)
................................................
Jeff Aldrich <aldrich@sunrise.Stanford.EDU>
R&D Engineer Center for Design Research
Stanford University
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:06:21 CDT