> I have a 3/280 CPU set-up for use with a high resolution (1600x1280)
> monitor and would like to connect a standard Sun low resolution
> 1152x900 monitor. The PROM users manual has an address offset for the
> EEPROM change and it notes that "a hardware change on the CPU board is
> necessary to complete a screen size change". Does anybody know what
> the required hardware change is???
All replys agreed that the 3/2x0 series CPU's can't toggle from high
resolution to low resolution. This option applies to the 3/60 only.
Kevin Sheehan <email@example.com>
Mike Raffety <firstname.lastname@example.org>
mark seiden <email@example.com>
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:06:19 CDT