I had a problem getting the system to recognize a disk. I kept
getting on boot:
> vmunix: esp0: Target 2 now Synchronous at 3.572 mb/s max transmit rate
> vmunix: sd2 at esp0 target 2 lun 0
> vmunix: sd2: Vendor 'QUANTUM', product 'P105SS', (unknown capacity)
and the following (on the console) on trying to "format" or "fsck".
> vmunix: sd2: offline
> vmunix: sd2 at esp0 target 2 lun 0
> vmunix: sd2: Vendor 'QUANTUM', product 'P105SS', (unknown capacity)
Thanks to those who replied:
uunet!macgyver.crim.ca!boudreau (Guy Boudreault)
uunet!cogsci.UCSD.EDU!wallen (Mark R. Wallen)
uunet!bartok.att.com!rk (Ravi Kagalavadi - 59114)
"Brad L. Knowles" <uunet!aeneas.jdssc.dca.mil!BLKNOWLE>
It turns out that something in the read-only portion of the disk had
gone bad. Sun came out and replaced the disk and everything is now
copacetic.
Tere
***** ***** ***** ***** ***** ***** ***** ***** ***** ***** ***** ***** *****
Terence P. Ma, Ph.D.
Department of Anatomy If it were easy, some one
University of Mississippi Medical Center would have done it already.
2500 North State Street -- anonymous
Jackson, MS 39216
VOICE: 601-984-1654 UUCP: tpm%tpm-sprl@uunet.uu.net
FAX: 601-984-1655
***** ***** ***** ***** ***** ***** ***** ***** ***** ***** ***** ***** *****
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:06:17 CDT