I asked whether or not there were any known problems using a 4/60 or
4/65 GX board and monitor on a 4/75. I received several responses,
all of which stated that they've done it or are currently doing it,
and that it works just fine. Nobody responded saying it wouldn't work.
Tim Chan (firstname.lastname@example.org) says that it's possible to use 4/75 GX boards in
a 4/60 or 4/65, but that you need to be careful _not_ to use a 4/75
color monitor with a 4/60 or 4/65 (the 4/75 color monitor runs at 76Hz,
while the older color monitor runs at 66Hz; the 4/75 GX board supports both
66Hz and 76Hz, while older GX boards support only 66Hz).
Thanks to the following:
Tim Chan <email@example.com>
Guntram Wolski <firstname.lastname@example.org>
Ole Holm Nielsen <email@example.com>
-- Brent Chapman Telebit Corporation Sun Network Specialist 1315 Chesapeake Terrace firstname.lastname@example.org Sunnyvale, CA 94089 Phone: 408/745-3264
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:06:13 CDT