Sun Managers,
Thanks for all of your replies so far. My original query:
> After replacing the standard 1Mb simms in a 4/65 with
>4Mb simms, I've been left with 8Mb of extra memory. Is
>this memory compatible with the 4/110 systems?
It seems that this memory will do much more good in a 4/110 than
it will where it now sits on my desk. In fact, in light of the error
message displayed on my 4/110 last night about a simm failure, the
spare memory comes in handy. The general consensus is that the 80ns
1Mb simms taken from a 4/65 (or many other systems) is compatible
with the 4/110. However, one person pointed out that I may need an
additional 8Mb of memory, since the published configuration only
supportss 8, 16, 20 and 32 Mb of memory. This would indicate that
the 4/110 has two banks of 16 simms each that would need to be
filled with the same size simms (like the 4/60 & 4/65 with simm
banks of 4). A few others forwarded the memory summary apparently
posted this month on this list which I missed while reconfiguring
my own system.
Again, thanks to the many systems managers who respond to this
list.
Bryan Rawson
School of Oceanography WB-10 E-Mail: rawson@ocean.washington.edu
University of Washington Phone: (206) 543-0676
Seattle WA 98195 FAX (206) 685-3354
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:06:00 CDT